Shot blasting machine wet dust removal project

The HDC series high-efficiency centrifugal wet dust collector used in this project utilizes centrifugal force to thoroughly mix water and dusty gas, and then remove clean air. When a dusty airflow passes through a stationary impeller partially submerged in water, a water curtain is generated, and dust is removed as it passes through this water curtain. There is a specially designed groove shaped mouth at the bottom of the blade, which is used to supplement additional water to the narrowest part of the impeller opening. The upward flow of water through the groove mouth increases the interaction between dust and water, thereby improving the dust collection efficiency. The centrifugal force generated by the rapid change in airflow direction permanently captures dust as it passes through the water curtain.

[Machine Model]：HDC-48

[Collection Efficiency]：More than 99%

[Application Area]：High temperature, high humidity, high viscosity, flammable and explosive dust. Sintering mixture, slag trap, light metal polishing and grinding, biomass power generation.